+4 Chrome Parts
Chrome Components
Stainless Luggage Rack
TECHNICAL NOTES ON EXTERIOR CHROME
BUMPERS: Bumpers fitted to 1950-53 “Flat Rads” are NLA. Bumpers fitted to 1954-57 cars are NLA. The bumpers that are available for 1958-76 are similar to the 1954-57 type though not quite the same. They do fit the 1954-57 cars. Some cars were fitted with bumpers front and rear, some with bumpers front and overriders rear.
BONNET KNOBS: Production +4 Morgans from 1950 used a “Bullseye” knob, the face of it was machined like a bullseye. In appx. 1966 a plain faced knob was used, both types are interchangeable.
WINDSHIELDS: There have been two variations of windshields fitted to the +4 Morgan. From 1950 through to appx. 1955 a “fold down” windshield was fitted. It was an option in 56-57 and if not fitted then a std. non folding windshield was fitted. On the non folding screen, the side braces that hold the screen, bolt to the body mount on narrow bodied cars are straight, while cars with a wide body have braces that have 2 bends in them. The folding screens have a body mount bracket that has 3 holes and the non folding brackets have 2 holes. 4 seater windshield frames are 1″ taller than a Roadster frame. In the lower corners where the top and bottom of the frame come together there is an angled brass piece that is screwed and soldered to the lower frame that is prone to break. We have these in stock.