+4 Internal Engine Parts
Note: The factory pulley on Morgan +4’s was from the Standard Vanguard engines, these are NLA. We have a replacement wide pulley assembly #22. Numbers 23 and 24 used in place of 19, 20, 21 should be held in place using blue lock tight.
Note: The picture of the thin pulley conversion is shown with one of our Alternator kits. If you have a generator the kit comes with an Aluminum generator pulley with cast in cooling fans. If you have an alternator kit from us and are considering converting to the thin pulley kit, we can supply the kit with a thin pulley for the alternator and a proper belt for the alternator setup. Kit is complete with T/C seal to fit new crank pulley. Crank pulley retaining bolt and washer included in kit.
Internal Engine Parts
